Suitable for processing STEEL and ALUMINIUM coils. For coils max. weight 30 tons, max. width 2150 mm, thicknesses between 0,5 and 3 mm and feeding speed up to 200 m/min.

The line includes:

• Double coil preparation station in masked time
• Software and devices for automatic set up to work steel or aluminium
• 6 HI leveler with interchangeable cassette for steel and aluminium
• Automatic leveler cassette change device
• Automatic leveler roll cleaning device
• Loop optimization software
• Optical sensor for step control
• Double separate feeder for steel and aluminium
• Microfeeder

For coils max. weight 25 tons, max. width 1850 mm and thicknesses of between 0,5 and 2 mm, Re 1000 N/mm².

The line includes:

• Coil preparation station in masked time
• Fully automatic strip introduction
• Automatic cropping at beginning and end of strip
• 6 HI leveler with interchangeable cassette
• High performance feeder
• Weld bead detection and ejection device

Multipurpose automatic feeding line (Blanking/Transfer/Progressive dies), for coils max. weight 25 tons, max. width 1850 mm and thicknesses from 0,5 to 3 mm, Re 1200 N/mm².

The line includes:

•  Double coil preparation station in masked time
• Automatic cropping at beginning and end of strip
• 6 HI leveler with interchangeable cassette
• Shear for blank production for transfer processing
• Puller for automatic scrap extraction from press dies
• Software for fully automated line set up, strip introduction and end

• Max. strip width 300 mm
• Max. strip thickness 18 mm
• Decoiling speed 50 mt/min
• Max. decoiler capacity 10 tons

The line is equipped with everything needed to process aluminium or lubricated strips. Dedicated software manages the type change, the strip end cycle and the strip head introduction in a fully automatic manner and considerably shorter time.

• Strip width from 200 to 2050 mm
• Strip thicknesses from 0,6 to 4 mm
• Speed up to 160 mt/min
• Max. coil weight 25 tons

For the production of blanks for the household appliance industry.

• Width 1000 mm
• Thickness 0,4 to 2 mm
• Decoiler capacity 12 tons

Welding station for coil end joining. This significantly reduces the press downtime during coil changes, it reduces the risk of  tools breaking and improves operator safety levels.

Line configuration S LOOP type to reduce vibrations in the loop and to increase feeder performance. Particularly suitable for presses with speeds higher than 500 stroke/min and material thicknesses 0,8 mm

Straightener with 19 rolls 32 mm diameter, particularly suitable for thicknesses from 0,5 to 1,2 mm, complete with thickness control system during automatic unwinding and automatic opening device for roll cleaning.

Double spindle decoiler with straightener positioned on a single base stand to avoid foundation work and reduce base footprint. Straightener with 21 rolls 18 mm diameter, particularly suitable for thicknesses from 0,2 to 0,5 mm. Traditional loop control FREE LOOP type.